Flexible LED Strip Tape - High Output Interior - Atlantic Marine Lighting

Categories

 Loading... Please wait...
  • High Output LED Strip Tape Cool White
  • High Output LED Strip Tape Warm White

Flexible LED Strip Tape - High Output Interior

$59.00 $53.99
(You save $5.01)
Weight:
1.50 LBS
Shipping:
Calculated at checkout
Quantity:

Product Description

High Output for interior installations, Warm White LEDs. Extremely low profile, flexible LED strip encased in clear epoxy. Mounts with 3M double-sided tape (included). Available in lengths of 4', 8' or 16' (12VDC only) and 5', 10' or 20' (24VDC only).

This version of our popular linear LED strip tape product uses brighter SMD LEDs for higher ambient illumination. Like the standard strip tape product, it is encased in a clear flexible epoxy and is provided with 3M self-adhesive tape for fast and secure installation. This product may be used in wet locations; however, it is not UV resistant and is, therefore, not suitable for exterior applications. For exterior installations please see our Exterior HO Strip Tape which has a different type of protective covering. The thin diameter and extremely low profile form factor allow this product to be installed in areas too confined for traditional rope light. Each section comes with wire leads so your LED Strip Tape is ready to connect to your DC power source. If required, this HO Flexible LED Strip Tape may be cut to suit every 4" (12V version) or every 6" (24V version). All our LED strip tape products provide homogenous, uniform light distribution without shadows or hot spots and are a great way to enhance the lighting in your living space. Applications include cove lighting, wall washing, under cabinet lighting, glass cabinets, wine racks, closets, etc.

Note:
This product performs optimally with constant voltage at or near the specified voltage input. It is sensitive to over-voltage and transient spikes, therefore long term performance is dependent on the input voltage provided. For installation on boats, a power conditioner is recommended for maximum life of the product.

Features & Benefits:

  • 50% brighter than standard Strip Tape (12V version)
  • Flat profile
  • Flexible clear epoxy coating
  • Wide angle SMD LEDs
  • Very low power consumption
  • Water resistant (interior applications only)
  • 3M double-sided tape (easy installation)

**Special Note for Households or Yachts with Line Voltage**
All versions of our low voltage (12VDC or 24VDC) Flexible LED Strip Tape is designed for hard-wire DC hook-up (i.e., from DC power supply or battery source). If stepping down voltage from a 120/230V source, a standard low voltage AC transformer will damage the product. You must use a DC power supply or a voltage-regulated LED converter for this purpose.

**Installation Note**
For mounting ease, each section is supplied with 3M double sided tape already installed on the product. For additional security, the tape can be mechanically secured using our Flexible Mounting Straps.

 

Product Details
LED Color: Cool White or Warm White
Length: 4', 8', 16' (12V) 5', 10', 20 (24V)
LED Type: Wide Angle SMD
Viewing Angle: 140°
Input Voltage: 12VDC or 24VDC
Power Consumption: 1.90 watts/ft (6.2 watts/m)
Luminous Flux: 46 lms/ft (151 lms/m)
Bulb Spacing: 1.3" (33.0mm)
Cutability: 4" (50mm)
Maximum Run: 19.7' (6m)
Mounting Straps: ILLT-STRAP, Sold separately
Height: 0.14" (3.52mm)
Width: 0.40" (10.20mm)
Ingress Protection: IP65

 

 

 

Find Similar Products by Category