
Camden PowerLED Bi-Color, Stainless Steel, 10-30VDC, Warm White/Red or Warm White/Blue or Cool White/Red or Cool White/Blue, IP65
Part of the Portland family of down lights, Camden is distinguished by a stylishly placed groove feature that runs just inside the edge of the decorative bezel. This bi-color version offers a full-brightness white LED (warm white or cool white) that will match other Imtra PowerLED spots and fixtures in both style and light output with the addition of a secondary color. The white LED is fully-dimmable with the use of our PWM dimmer and a momentary switch. A three-position switch may be used to toggle between the two different LED colors and full off. This boat light is ideally suited for the helm area and nighttime navigation.
Dimming: For consistent color temperature and full dimming range, use with our PowerLED Dimmer Module, ILIM80110.
Features & Benefits:
Trim Ring Finish | Stainless Steel |
Trim Ring Material | Stainless Steel |
Lens Material | Frosted glass |
Housing Material | E-coat Aluminum |
Trim Ring Diameter | 3.43" (87.1mm) |
Cut-out Diameter | 2.50" (64mm) |
Recessed Depth | 0.92" (23mm) |
Input Voltage | 10-30VDC |
Beam Angle (FWHM) | 100° |
Power Consumption | 4.7W |
Light Output (Lumens) | 179 Lumens |
LED Emitting Color(s) | Warm White/Red or Warm White/Blue or Cool White/Red or Cool White/Blue |
Correlated Color Temperature (CCT) | 2800K (White) |
Color Rendering Index (CRI) | 83 |
Lifetime Hours (L70) | 50,000 hrs (70% light output) |
Electrical Protections | Reverse Polarity, 200V Spike Protection, Transient Protection |
Safety Standards Compliance | CE-EMC, UL 1598, UL1149, UL 8750, CSA C22.2#250.0 |
Dimmer Interface | Pulse Width Modulation |
Dimmer Module | See ILIM80110 |
Mounting Method | Screw-mount |
Ingress Protection | IP65 |
Manufacturer | Imtra |