The Captiva PowerLED is an attractive recessed spot with adjustable inner “eyeball” making the pivoting center perfect to accent artwork, use as a wall wash, or for general illumination. A fully-functional LED eyeball is now available directing light just where you need it without compromising overall lumen output. It can also be an ideal selection for sloped ceilings commonly found above companionways; the light may be directed straight down preventing temporary “blinding” as one steps down to lower living quarters. The clean lens aperture is pleasing to the eye, eliminating any harsh “hot spots” and making the Captiva the premiere LED product of choice. A built-in dimmer interface allows for effortless touch-control dimming using our Captiva PowerLED PWM Dimmer.
Features & Benefits:
- Pivoting center "eyeball"
- Thin profile
- 316 stainless steel bezel
- Convenient self-adjusting mounting springs
- Integrated drive electronics
- PWM dimming interface
- Directional control of lighting
- Substantial power savings
- High lumen output (greater than 15W halogen)
- Cooler cabin temperatures
- Maintenance-free: No more bulb changes
Product Details |
Trim Ring Material: |
316 Stainless Steel |
Trim Ring Diameter: |
3.32" (84.4mm) |
Cut-out Diameter: |
2.95" (75mm) |
Recessed Depth: |
1.52" (38.6mm) |
Voltage: |
8-30VDC |
Input Power (Watts): |
3.2W |
LED Engine: |
3 x 1W LED - Warm |
Beam Angle (FWHM): |
63° |
Light Output (Lumens): |
170 lms |
Correlated Color Temperature (CCT): |
3000K |
Lifetime Hrs (70% lm): |
50,000 hrs (70% light output) |
Electrical Protection: |
Reverse Polarity, 40V Spike Protection |
Dimmer Module: |
Captiva PowerLED PWM Dimmer ILIM80102 |
Mounting Method: |
Spring-Mount |
Wire Size: |
See Chart |
Ingress Protection: |
IP20 |
|
|
|
Selectable Models ILIM31701 ILIM31700 ILIM31702
1 Year Manufacturer's warranty on finish parts
5 Year Manufacturer's warranty on LED engine