null Skip to main content

T180 Power LED, 10-40VDC

Imtra Lights

$161.54
SKU:
ILIM69000.
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

T180 Power LED, 10-40VDC

Featuring 2-wire power & dimming, T105/T155/180 PowerLED fixtures easily replace existing legacy (halogen) spots negating the need to run extra wires. Integrated drive electronics eliminates the need for remote driver installation. Carefully designed optics result in fully blended illumination free of annoying artifacts or distracting hot spots. A robust thermal management system results in maximum life with minimal lumens depreciation over its expected working life (50,000+ hrs). T155/180 models offer single or bi-color dimming when paired with Imtra's single or dual channel PWM dimmer module. These fixtures feature a traditional raised-round bezel in several finishes. The T155/180 PowerLEDs securely mounted with three screws and are ideal for hard ceilings (e.g. fiberglass or wood). It  is a good choice for wet areas (e.g. hard tops, arches, walkway overhangs, shower stalls). Made in the USA and covered by a 5 year warranty!

  • Twist-on round stainless steel bezel design
  • Convenient 2-wire power & dimming
  • Bi-color dimming models controlled with single momentary switch
  • Integrated current controlled drive circuitry
  • Double gaskets for splash-proof protection
Trim Ring (Bezel) Finish/Material White or Stainless Steel
Housing Finish/Material Aluminum
Lens Material Frosted Glass
Trim Ring (Bezel) Dimensions 7.09" (180mm)
Cut-out Dimensions 5.10" (130mm)
Recessed Depth 1.08" (27mm)
Dimensions See Dimensional Drawing
Integrated Switch No
Voltage 10-40VDC
Halogen Equivalency 25W
Power Consumption 4.7W
Driver Integrated
Output Color Warm White or Cool White
Luminous Flux 206 lms
Correlated Color Temperature (CCT) 2800K
Color Rendering Index (CRI) 85
Lifetime Hours 50,000 hrs
Dimmer Compatibility ILIM80130, ILIM80140
Dimmer Control Interface Momentary Push-Button
Dimming Range 5-100%
Install Location Exterior (hard tops, overhangs, showers)
Ingress Protection IP65 (applies only to frontal water exposure, i.e. Exposed surface)
Class III
Electrical Protections Reverse Polarity, Transient & Spike Protection
Certifications & Compliance CE-EMC, ROHS
Manufacturer Imtra
Warranty 5 Years / 1 Year Finish

Available SKUs ILIM69000, ILIM69001, ILIM69100, ILIM69101

Click here for dimensional drawing

5 year manufacturer's warranty/1 year finish